Cigarette Lighter Lighter Replacement 12V
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

Cigarette Lighter Lighter Replacement 12V

Available:In Stock
£1.95
Image
  • Order within
Secure

ILLUMINATED CIGARETTE LIGHTER SOCKET

This Replacement cigarette lighter socket is supplied as a complete assembly and can be used as a replacement for any existing unit.

Plug all of your external 12volt devices tomtom car chargers etc.
It can also be fitted where a blanked hole is provided or using a 27mm diameter hole, in any other suitable position on the dashboard.
The bezel on the front of the light illuminates when the vehicle's lights are in use at night.

GUIDE TO FITTING
The Cigarette Lighter is held in position by the outer part of the body which should be unscrewed and removed.
Place the remainder of the Cigarette Lighter, including the illuminated bezel, through the hole from the, replace the outer body from the rear and tighten.

GUIDE TO WIRING
1. Middle spade terminal connect to 12volt power source.
2. Connect the outer spade terminal to a suitable earthing point.
3. For the illumination connect the red wire to an illumination lighting circuit.
4. Connect the black wire to a suitable earth point.
IF YOU ARE IN ANY DOUBT WE RECOMMEND THAT YOU SEEK ADVICE FROM AN AUTO ELECTRICIAN

NO CIGARETTE ELEMENT IS INCLUDED

 

ILLUMINATED CIGARETTE LIGHTER SOCKET

This Replacement cigarette lighter socket is supplied as a complete assembly and can be used as a replacement for any existing unit.

Plug all of your external 12volt devices tomtom car chargers etc.
It can also be fitted where a blanked hole is provided or using a 27mm diameter hole, in any other suitable position on the dashboard.
The bezel on the front of the light illuminates when the vehicle's lights are in use at night.

GUIDE TO FITTING
The Cigarette Lighter is held in position by the outer part of the body which should be unscrewed and removed.
Place the remainder of the Cigarette Lighter, including the illuminated bezel, through the hole from the, replace the outer body from the rear and tighten.

GUIDE TO WIRING
1. Middle spade terminal connect to 12volt power source.
2. Connect the outer spade terminal to a suitable earthing point.
3. For the illumination connect the red wire to an illumination lighting circuit.
4. Connect the black wire to a suitable earth point.
IF YOU ARE IN ANY DOUBT WE RECOMMEND THAT YOU SEEK ADVICE FROM AN AUTO ELECTRICIAN

NO CIGARETTE ELEMENT IS INCLUDED