Fuel Cap Screw Fit With Keys
- Product SKU: AP PLC1
- Category:Accessories,Repair And Maintenance
- Order within
SAFETY SCREW FIT CAP
Lockable
Screw Fit Only
Supplied With 2 Keys
Please note this is not a cheap internet cap that is sold on the net, and falls apart after a while.
THIS WILL ONLY FIT SCREW ON TYPE CAPS PLEASE MAKE SURE YOUR ORIGINAL IS A SCREW FIT.
OE DIRECT REPLACEMENT
You will need a locking cap to meet MOT standards
THIS CAP WILL NOT FIT ON FORD CARS WITH A ZETEC ENGINE
Dimensions:
Inner Diameter: 3.8
Outer Diameter: 6.8
Fitting Guide:
Screw Type Caps:
1. Screw cap tightly onto the filler neck.
2. Insert the key, turn it 180 degrees clockwise [half a turn] & remove key.
3. After this operation the cap will turn around freely, and therefore it cannot be unscrewed.
4. To open, repeat stage two, but hold the cap to prevent it moving so as you can unlock it (turn key 180 degrees anti-clockwise).
SAFETY SCREW FIT CAP
Lockable
Screw Fit Only
Supplied With 2 Keys
Please note this is not a cheap internet cap that is sold on the net, and falls apart after a while.
THIS WILL ONLY FIT SCREW ON TYPE CAPS PLEASE MAKE SURE YOUR ORIGINAL IS A SCREW FIT.
OE DIRECT REPLACEMENT
You will need a locking cap to meet MOT standards
THIS CAP WILL NOT FIT ON FORD CARS WITH A ZETEC ENGINE
Dimensions:
Inner Diameter: 3.8
Outer Diameter: 6.8
Fitting Guide:
Screw Type Caps:
1. Screw cap tightly onto the filler neck.
2. Insert the key, turn it 180 degrees clockwise [half a turn] & remove key.
3. After this operation the cap will turn around freely, and therefore it cannot be unscrewed.
4. To open, repeat stage two, but hold the cap to prevent it moving so as you can unlock it (turn key 180 degrees anti-clockwise).
