Universal Lighter Plug 12V
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

Universal Lighter Plug 12V

Available:In Stock
£0.75
Image
  • Order within
Secure
Cigarette Lighter Plug

Quantity: 1
12 Volt Un-Fused
Suitable for in-car use
Short-circuit protection Convenient to charge your device while driving Portable, lightweight, compact size design. Keep voltage steady to prevent devices from overcharging Details strong. Universal Fitment Working voltage: 12V Unfused 10A Requires Soldering (Positive to the tip of plug, Negative to the side spring)
Dimensions: 65mm x 20mm
Plug unscrews and wires can be soldered on and screwed back together

Fitting Instructions:

Preparation:

1. Remove lighter insert from assembly.
NOTE: Please retain any radio codes (if applicable) before disconnecting the battery as these may be required to operate the radio on reconnection.

GUIDE TO WIRING:

Bulb Connection

1. Always disconnect battery before working on the vehicle’s electrical circuits.
2. Identify a suitable connection point with the dashboard lighting circuit. 
3. Connect the red lead of the bulb holder to the dashboard lighting circuit.

Power Connection

1. Identify a suitable electrical circuit for connection that is protected by a 15-20 amp fuse.
2. Make the 12V positive connection to the centre terminal using the red lead provided.
3. Connect the outer terminal to a suitable earthing point using the black lead provided. 

FINAL STEPS:

1. Place the metal assembly including the bulb holder through the hole from the front.
2. Replace lighter insert into assembly.

Cigarette Lighter Plug

Quantity: 1
12 Volt Un-Fused
Suitable for in-car use
Short-circuit protection Convenient to charge your device while driving Portable, lightweight, compact size design. Keep voltage steady to prevent devices from overcharging Details strong. Universal Fitment Working voltage: 12V Unfused 10A Requires Soldering (Positive to the tip of plug, Negative to the side spring) Dimensions: 65mm x 20mm Plug unscrews and wires can be soldered on and screwed back together

Fitting Instructions:

Preparation:

1. Remove lighter insert from assembly.
NOTE: Please retain any radio codes (if applicable) before disconnecting the battery as these may be required to operate the radio on reconnection.

GUIDE TO WIRING:

Bulb Connection

1. Always disconnect battery before working on the vehicle’s electrical circuits.
2. Identify a suitable connection point with the dashboard lighting circuit. 
3. Connect the red lead of the bulb holder to the dashboard lighting circuit.

Power Connection

1. Identify a suitable electrical circuit for connection that is protected by a 15-20 amp fuse.
2. Make the 12V positive connection to the centre terminal using the red lead provided.
3. Connect the outer terminal to a suitable earthing point using the black lead provided. 

FINAL STEPS:

1. Place the metal assembly including the bulb holder through the hole from the front.
2. Replace lighter insert into assembly.