PROFESSIONAL BRAKE AND CLUTCH BLEEDING KIT
This system sets the standard for affordable, one man operation, brake and clutch bleeding system.
Using air pressure from a spare wheel it will effortlessly bleed hydraulic systems.
There are a number of adapters available to fit most vehicles with screw cap reservoirs and comprehensive instructions included.
Uses fresh fluid under pressure to flush air and old fluid from brake and clutch systems.
Connection to the master cylinder reservoir
Pressurise from a spare tyre. This cuts out the pedal pumping and makes sure the fluid goes only one way through the system.
Open each bleed valve in sequence.
Can be used on the following systems: Tandem Master Cylinders without sensors/Tandem reservoirs/Slave servos/Vacuum servos
1 x Bottle
1 x Bottle cap assembly with tyre connector
2 x 30mm Hose (2 Sizes 80mm / 60mm)
1 x 25mm Metal cap and seal for Lockheed stystems
1 x 27mm Metal caps for VAG Systems
1 x 44 / 45mml plastic caps and 2 seals for metal Girling and all ATE systems
(For 44mm use thin seal . For 45mm use the thick seal)
1 x 46mm Metal cap and seal for Girling systems
An airtight seal on the reservoir ensures:
Fast fluid replacement
Faultless one man operation
Full instructions supplied
Universal caps for most vehicles with screw cap reservoirs
NOT SUITED IF YOUR CAP IS NOT SCREW FIT