SAFETY SCREW FIT CAP
Screw Fit Only
Supplied With 2 Keys
Please note this is not a cheap internet cap that is sold on the net, and falls apart after a while.
THIS WILL ONLY FIT SCREW ON TYPE CAPS PLEASE MAKE SURE YOUR ORIGINAL IS A SCREW FIT.
OE DIRECT REPLACEMENT
You will need a locking cap to meet MOT standards
THIS CAP WILL NOT FIT ON FORD CARS WITH A ZETEC ENGINE
Inner Diameter: 3.8
Outer Diameter: 6.8
Screw Type Caps:
1. Screw cap tightly onto the filler neck.
2. Insert the key, turn it 180 degrees clockwise [half a turn] & remove key.
3. After this operation the cap will turn around freely, and therefore it cannot be unscrewed.
4. To open, repeat stage two, but hold the cap to prevent it moving so as you can unlock it (turn key 180 degrees anti-clockwise).
Every effort has been made to ensure the accuracy and comprehensiveness of the information included.
If in any doubt please contact us on or email us and we will advise you of the correct fuel cap for your vehicle.
Important notice BEFORE ordering
Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models.
Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held responsible for wrong parts ordered if you have not carried out the above. If you have any questions about fitment, give us a call or email.